Renault Clio Mk2 172 - Brake Cooling Duct Fitment Guide

Parts Required

Brake duct installation kit

1) Flexible Ducting (2", 2.5" & 3") - Approx.700mm RH - 600mm LH used in our test fitment

2) Cable Ties 8x (300mm x 7.6mm) x2 (450mm x 7.6mm) - (Jubilee clips to secure flexible ducting to duct is optional)

3) M5 x 15mm Screws x4 - (Alternatively use the OEM fasteners)

4) M5 x 15mm Washers x4

5) SKR Renault Clio Brake Cooling Duct Intake x1 (Pair)

6) SKR Renault Clio Brake Cooling Duct Outlet x1 (Pair)

Step 1 - Removing the fog light

Begin by removing the OEM fog lights. (The fog light holes will serve as the air intake).

There are two T20 screws on the back

Renault Clio 172 Mk2 Fog Light Brak Duct Intake

Renault Clio 172 Mk2 Fog Light Brak Duct Intake

Step 2 - Install Brake Cooling Duct Intake

Installing the SKR Brake Duct Intake, and the M5 screws & washers.

Renault Clio 172 Mk2 Fog Light Brak Duct Intake

Step 3 - Install Brake Cooling Duct Outlet

Installing the SKR Brake Duct Outlet using the cable ties specified above.

How to install the SKR Dynamics Clio Mk2 Brake Cooling Duct Outlets

Step 4 - Cut The Flexible Ducting To Length

Using a retractable knife or similar cut the ducting to length.

Step 5 - Install The Flexible Ducting

Install the flexible ducting ensuring to route the ducting the perrimiter of the wheel well. It's advisable to check the clearance lock to lock before securing.

Renault Clio Mk2 172 Brake Cooling Ducts

Renault Clio Mk2 172 Brake Cooling Ducts

Renault Clio Mk2 172 Brake Cooling Ducts Outlet

Renault Clio Mk2 172 Brake Cooling Ducts Inlet

Step 6 - Secure ducting with Cable Ties

Secure the ducting to the intake and outlet using cable ties (Or jubilee clips).

Note: It may be necessary to secure the ducting to the chassis in places to ensure clearance of the wheel on full lock.

References

Renault Clio Mk2 Brake Duct Intake

Buy Now